AcidPro 7 - Instruments input okay but no output? -ACID Product Family

Subject:AcidPro 7 - Instruments input okay but no output? Posted by: mianoel123 Date:11/22/2015 2:15:13 PM Anyone, I have a Windows 10 machine running Acid Pro 7e with a 2.41 GHz CPU and 4 GB of RAM & 1TB of disk. I'm connected to a Behringer X32 digital mixer board via ASIO4ALL driver and Also using Behringer X-USB 2.230 audio driver. I'm recording worship services where I use 28 channels. My sample rate is 512/ 44,100 / 16 Bit. I have a keyboard, bass guitar, and electric guitar plugged into Acid via ASIO4All driver. . When recording/monitoring, I can see the input of each channel but there is no output. I have the output set the same as my microphones but for some reason the output on these instrucments even though I see input movement, the output goes in & out. Like clipping but it is not. You hear the electric guitar go in & out on the output channel/bus but the input show steady. Any help appreciated.
Subject:RE: AcidPro 7 - Instruments input okay but no output? Reply by: JohnnyRoy Date:11/22/2015 5:52:32 PM I have to ask the same question as your other post. According to Behringer: Instant compatibility with major DAWs The Behringer X32 digital mixer comes with the X-USB recording interface card, which lets you record your tracks straight into your DAW. This convenience means that right out of the box, you have compatibility with Pro Tools, Logic, Cubase, Studio One, and nearly any other ASIO or Core Audio-compatible DAW. So why are you using ASIO4ALL when the Behringer X32 comes with it's own ASIO driver? ~jr
Subject:RE: AcidPro 7 - Instruments input okay but no output? Reply by: mianoel123 Date:11/22/2015 9:54:57 PM Same response. The X32 drivers use input only, I get no output so that we can monitor the recording. the X-USB 2.23 driver is installed but no output only input. If I'm doing something wrong but it is not working but the ASIO4ALL gives us our output to monitor the recording. Let me know if I'm doing something wrong.

Subject:AcidPro 7 - Instruments input okay but no output?

Posted by: mianoel123

Date:11/22/2015 2:15:13 PM

Anyone,

I have a Windows 10 machine running Acid Pro 7e with a 2.41 GHz CPU and 4 GB of RAM & 1TB of disk. I'm connected to a Behringer X32 digital mixer board via ASIO4ALL driver and Also using Behringer X-USB 2.230 audio driver. I'm recording worship services where I use 28 channels. My sample rate is 512/ 44,100 / 16 Bit.

I have a keyboard, bass guitar, and electric guitar plugged into Acid via ASIO4All driver. . When recording/monitoring, I can see the input of each channel but there is no output. I have the output set the same as my microphones but for some reason the output on these instrucments even though I see input movement, the output goes in & out. Like clipping but it is not. You hear the electric guitar go in & out on the output channel/bus but the input show steady. Any help appreciated.

Subject:RE: AcidPro 7 - Instruments input okay but no output?

Reply by: JohnnyRoy

Date:11/22/2015 5:52:32 PM

I have to ask the same question as your other post. According to Behringer:

Instant compatibility with major DAWs
The Behringer X32 digital mixer comes with the X-USB recording interface card, which lets you record your tracks straight into your DAW. This convenience means that right out of the box, you have compatibility with Pro Tools, Logic, Cubase, Studio One, and nearly any other ASIO or Core Audio-compatible DAW.

So why are you using ASIO4ALL when the Behringer X32 comes with it's own ASIO driver?

~jr

Subject:RE: AcidPro 7 - Instruments input okay but no output?

Reply by: mianoel123

Date:11/22/2015 9:54:57 PM

Same response. The X32 drivers use input only, I get no output so that we can monitor the recording. the X-USB 2.23 driver is installed but no output only input. If I'm doing something wrong but it is not working but the ASIO4ALL gives us our output to monitor the recording. Let me know if I'm doing something wrong.