Subject:Time Recorded Not Updating

Posted by: DCools

Date:3/16/2001 4:20:18 AM

Hi There,

I have a problem with Sound Forge 5.0 Build 117. When I
push record, the “Time recorded: 00:00:00,000” does not get
updated in the Record dialog. Recording time in the
right/down (status), get updated perfectly. The same
problem occurred on another PC with the same graphic card.
On again another PC which does not have a nVIDIA, it works
fine.

My graphic card is a nVIDIA Riva TNT2, Bios version
1.95E5802.
Windows 2000 Pro. SP1.

Should I leave this here or should I contact nVIDIA

Best regards,
Diederick F.M. Cools.

Subject:RE: Time Recorded Not Updating

Reply by: Ted_H

Date:3/16/2001 11:23:13 AM

I haven't seen this yet. Is anybody experiencing a similar
problem?

Ted

Subject:Time Recorded Not Updating

Reply by: DCools

Date:3/17/2001 7:03:37 AM

Hi There again,

To be accurate,

My Graphic card is a nVIDIA TNT2 Model 64 Bios v2.05.13.03.
The Graphic card on the other PC which also doesn't work is
a nVIDIA Riva TNT Bios 1.95E5802. Windows is still 2000
Pro. SP1 :). I used drivers from the original installation
of Windows 2000 Pro, last downloaded an update of the
microsoft driver and I used drivers of nVIDIA. Not one of
the drivers works with this problem. Sound Forge 4.5
doesn't have this problem btw.

Best regards,
Diederick F.M. Cools.

Subject:Time Recorded Not Updating

Reply by: DCools

Date:3/17/2001 8:12:06 AM

Hello,

Another thing I have found you can see in the following movie (which I made with Vegas Video of course :) )

Counter is not updating but when I right-Click my mouse in the Record dialog, sometime you see the recorded time, but it goes back to 00:00:00.000.

[Link is dead]

Regards,
Diederick F.M. Cools.