Subject:Reducing distortion: advice?
Posted by: Monza
Date:12/12/2000 9:49:00 AM
Greetings! I'm writing in after searching the database. I didn't find my answer there so I address you folks to ask: Source = DAT tape recorded at 48800Hz, 16 bit Stereo Problem = Some clipping occurs on this source tape. Task = record material and attempt to reduce clipping from source. Impossible? Please advise. Thank You. =================================================== Bonjour! J'ai cherché mais n'ai pas trouvé la réponse dans ce forum. Voici la situation: Source = cassette DAT enregistré a 48800Hz, 16 bit Stereo Problème = Distortion occasionnelle. Travail a faire = Enregistrer ce materiel et essayer de réduire cette distortion qui vient de la source DAT. Impossible? Que disez vous? Merci! --------------------------------------------------- Maurice N. Dias Video Editor Telecine Multimedia Inc. Montréal, Québec, Canada --------------------------------------------------- '91 ZR750 '82 P200E R.I.P. |
Subject:Re: Reducing distortion: advice?
Reply by: Rednroll
Date:12/12/2000 10:19:00 AM
Yes what you're asking is a very difficult task. Sonic Foundry has a "restore clipped peaks" plugin. I've used it and it works pretty well for doing the exact thing you're asking for. At miniumum it reduces the harshness of the clipped peaks. I don't recall, exactly what set of their plugins offers this feature off the top of my head, I'm thinking it's probably in the "Noise Reduction" plugins set. I'm sure Ted will gladly impart this information to you or else you can search through their "products" section on this website. Maurice wrote: >>Greetings! >> >>I'm writing in after searching the database. I didn't find >>my answer there so I address you folks to ask: >> >>Source = DAT tape recorded at 48800Hz, 16 bit Stereo >> >>Problem = Some clipping occurs on this source tape. >> >>Task = record material and attempt to reduce clipping from >>source. >> >>Impossible? Please advise. >> >>Thank You. >>=================================================== >>Bonjour! >> >>J'ai cherché mais n'ai pas trouvé la réponse dans ce forum. >>Voici la situation: >> >>Source = cassette DAT enregistré a 48800Hz, 16 bit Stereo >> >>Problème = Distortion occasionnelle. >> >>Travail a faire = Enregistrer ce materiel et essayer de >>réduire cette distortion qui vient de la source DAT. >> >>Impossible? Que disez vous? >> >>Merci! >>--------------------------------------------------- >>Maurice N. Dias >>Video Editor >>Telecine Multimedia Inc. >>Montréal, Québec, Canada >>--------------------------------------------------- >>'91 ZR750 >>'82 P200E R.I.P. >> |
Subject:Re: Reducing distortion: advice?
Reply by: Monza
Date:12/12/2000 10:27:00 AM
Hello Brian. Yes, I *thought* there was a plugin for this... I'll look into the "Noise Rduction" package. You're right: it isn't easy rescuing clipped audio (speech in this case...) Thank you. I appreciate your prompt reply. Anyone else think of another solution? Brian Franz wrote: >>Yes what you're asking is a very difficult task. Sonic >>Foundry has a "restore clipped peaks" plugin. I've used it >>and it works pretty well for doing the exact thing you're >>asking for. At miniumum it reduces the harshness of the >>clipped peaks. I don't recall, exactly what set of their >>plugins offers this feature off the top of my head, I'm >>thinking it's probably in the "Noise Reduction" plugins >>set. I'm sure Ted will gladly impart this information to >>you or else you can search through their "products" section >>on this website. >> >>Maurice wrote: >>>>Greetings! >>>> >>>>I'm writing in after searching the database. I didn't >>find >>>>my answer there so I address you folks to ask: >>>> >>>>Source = DAT tape recorded at 48800Hz, 16 bit Stereo >>>> >>>>Problem = Some clipping occurs on this source tape. >>>> >>>>Task = record material and attempt to reduce clipping >>from >>>>source. >>>> >>>>Impossible? Please advise. >>>> >>>>Thank You. >>>>=================================================== >>>>Bonjour! >>>> >>>>J'ai cherché mais n'ai pas trouvé la réponse dans ce >>forum. >>>>Voici la situation: >>>> >>>>Source = cassette DAT enregistré a 48800Hz, 16 bit Stereo >>>> >>>>Problème = Distortion occasionnelle. >>>> >>>>Travail a faire = Enregistrer ce materiel et essayer de >>>>réduire cette distortion qui vient de la source DAT. >>>> >>>>Impossible? Que disez vous? >>>> >>>>Merci! >>>>--------------------------------------------------- >>>>Maurice N. Dias >>>>Video Editor >>>>Telecine Multimedia Inc. >>>>Montréal, Québec, Canada >>>>--------------------------------------------------- >>>>'91 ZR750 >>>>'82 P200E R.I.P. >>>> |
Subject:Re: Reducing distortion: advice?
Reply by: Ted_H
Date:12/12/2000 12:37:00 PM
Hi Maurice, The clipped peak restoration in Noise Reduction works well for brief clips, but is not intended to restore something that is badly distorted. If the entire tape is clipped, Noise Reduction may not be the thing to use. You can always download a demo of Noise Reduction from our downloads page and try it out. Ted Maurice wrote: >>Hello Brian. >> >>Yes, I *thought* there was a plugin for this... I'll look >>into the "Noise Rduction" package. You're right: it isn't >>easy rescuing clipped audio (speech in this case...) >> >>Thank you. I appreciate your prompt reply. >> >>Anyone else think of another solution? >> >>Brian Franz wrote: >>>>Yes what you're asking is a very difficult task. Sonic >>>>Foundry has a "restore clipped peaks" plugin. I've used >>it >>>>and it works pretty well for doing the exact thing you're >>>>asking for. At miniumum it reduces the harshness of the >>>>clipped peaks. I don't recall, exactly what set of their >>>>plugins offers this feature off the top of my head, I'm >>>>thinking it's probably in the "Noise Reduction" plugins >>>>set. I'm sure Ted will gladly impart this information to >>>>you or else you can search through their "products" >>section >>>>on this website. >>>> >>>>Maurice wrote: >>>>>>Greetings! >>>>>> >>>>>>I'm writing in after searching the database. I didn't >>>>find >>>>>>my answer there so I address you folks to ask: >>>>>> >>>>>>Source = DAT tape recorded at 48800Hz, 16 bit Stereo >>>>>> >>>>>>Problem = Some clipping occurs on this source tape. >>>>>> >>>>>>Task = record material and attempt to reduce clipping >>>>from >>>>>>source. >>>>>> >>>>>>Impossible? Please advise. >>>>>> >>>>>>Thank You. >>>>>>=================================================== >>>>>>Bonjour! >>>>>> >>>>>>J'ai cherché mais n'ai pas trouvé la réponse dans ce >>>>forum. >>>>>>Voici la situation: >>>>>> >>>>>>Source = cassette DAT enregistré a 48800Hz, 16 bit >>Stereo >>>>>> >>>>>>Problème = Distortion occasionnelle. >>>>>> >>>>>>Travail a faire = Enregistrer ce materiel et essayer de >>>>>>réduire cette distortion qui vient de la source DAT. >>>>>> >>>>>>Impossible? Que disez vous? >>>>>> >>>>>>Merci! >>>>>>--------------------------------------------------- >>>>>>Maurice N. Dias >>>>>>Video Editor >>>>>>Telecine Multimedia Inc. >>>>>>Montréal, Québec, Canada >>>>>>--------------------------------------------------- >>>>>>'91 ZR750 >>>>>>'82 P200E R.I.P. >>>>>> |