Subject:sf 4.5 and mmc-38

Posted by: juan

Date:5/2/2000 8:54:00 PM

I'm having troubles getting sf 4.5 to talk to the mmc-38
(machine control for the tascam da-38). I've tried having
the da-38 as the slave....didn't work, so then I re-
arranged the cables and tried it as the master...didn't
work. I was recieving and error for my midi in selection
as a "bad midi device". I've done all the tests that my
sound card mfg recomended, and these test all passed. The
manual on the da-38 is not very good. Has any one had this
problem, or can any one recommend what to do??

thanks!

hardware:
Gadget labs 824 sound card
win nt
128 meg ram
450mHz amd-k6
Trident ISA video card (yes ISA).

Subject:Re: sf 4.5 and mmc-38

Reply by: Kelly_S

Date:5/10/2000 3:03:00 PM

Hello.

Unfortunately Sound forge has no Machine Control features.

Thanks.

juan carlos wrote:
>>I'm having troubles getting sf 4.5 to talk to the mmc-38
>>(machine control for the tascam da-38). I've tried having
>>the da-38 as the slave....didn't work, so then I re-
>>arranged the cables and tried it as the master...didn't
>>work. I was recieving and error for my midi in selection
>>as a "bad midi device". I've done all the tests that my
>>sound card mfg recomended, and these test all passed. The
>>manual on the da-38 is not very good. Has any one had this
>>problem, or can any one recommend what to do??
>>
>>thanks!
>>
>>hardware:
>>Gadget labs 824 sound card
>>win nt
>>128 meg ram
>>450mHz amd-k6
>>Trident ISA video card (yes ISA).
>>