Monitoring FROM ACID/ SAMPLING FROM SF 4.5 -ACID Product Family

Subject:Monitoring FROM ACID/ SAMPLING FROM SF 4.5 Posted by: nmr2 Date:4/27/2000 2:03:00 PM when i trigger the sound regions I want in Soundforge to play on my external controller, I want to use ACID to record into while montoring my other tracks.....I can get the tracks to playback just fine when recording, the only problem I am running into is that the signal from the sound events are being recorded very low, almost non-existent!!! I hear the sound events being recorded, so my playback and recording options are all ok, and i have my MIDI volume fader on my SB PC1512(soundcard) all the way up, as well as the other soundcard inputs/outputs......why is the level of recording so low, it's a mono sample, but that shouldn't do anything w/ the amplitude of the signal, how can I route the audio signal being played in SF (a virtual sample being triggered) to be recorded by ACID as regions are triggered and have no signal loss.....is it a software configuration or wahat, i don't think it's my audio on my sound card b/c i'm only using MIDI I/O......and Line Out for playback in my monitor speakers of course......please let me know if I need to configure ACID to record directly from audio region being triggered in SF 4.5....thanks a lot nate
Subject:Re: Monitoring FROM ACID/ SAMPLING FROM SF 4.5 Reply by: Kelly_S Date:5/22/2000 8:26:00 PM Hello Nate. To me, it sounds like a mixer setting that needs to be adjusted...but, it's really hard to tell. Not every card can record it's own output/MIDI signal. Unfortunately there's not much we can suggest here, you would have to refer to your soundcard manual for this one. Thanks. nate wrote: >>when i trigger the sound regions I want in Soundforge to >>play on my external controller, I want to use ACID to >>record into while montoring my other tracks.....I can get >>the tracks to playback just fine when recording, the only >>problem I am running into is that the signal from the sound >>events are being recorded very low, almost non-existent!!! >>I hear the sound events being recorded, so my playback and >>recording options are all ok, and i have my MIDI volume >>fader on my SB PC1512(soundcard) all the way up, as well as >>the other soundcard inputs/outputs......why is the level of >>recording so low, it's a mono sample, but that shouldn't do >>anything w/ the amplitude of the signal, how can I route >>the audio signal being played in SF (a virtual sample being >>triggered) to be recorded by ACID as regions are triggered >>and have no signal loss.....is it a software configuration >>or wahat, i don't think it's my audio on my sound card b/c >>i'm only using MIDI I/O......and Line Out for playback in >>my monitor speakers of course......please let me know if I >>need to configure ACID to record directly from audio region >>being triggered in SF 4.5....thanks a lot nate

Subject:Monitoring FROM ACID/ SAMPLING FROM SF 4.5

Posted by: nmr2

Date:4/27/2000 2:03:00 PM

when i trigger the sound regions I want in Soundforge to
play on my external controller, I want to use ACID to
record into while montoring my other tracks.....I can get
the tracks to playback just fine when recording, the only
problem I am running into is that the signal from the sound
events are being recorded very low, almost non-existent!!!
I hear the sound events being recorded, so my playback and
recording options are all ok, and i have my MIDI volume
fader on my SB PC1512(soundcard) all the way up, as well as
the other soundcard inputs/outputs......why is the level of
recording so low, it's a mono sample, but that shouldn't do
anything w/ the amplitude of the signal, how can I route
the audio signal being played in SF (a virtual sample being
triggered) to be recorded by ACID as regions are triggered
and have no signal loss.....is it a software configuration
or wahat, i don't think it's my audio on my sound card b/c
i'm only using MIDI I/O......and Line Out for playback in
my monitor speakers of course......please let me know if I
need to configure ACID to record directly from audio region
being triggered in SF 4.5....thanks a lot nate

Subject:Re: Monitoring FROM ACID/ SAMPLING FROM SF 4.5

Reply by: Kelly_S

Date:5/22/2000 8:26:00 PM

Hello Nate.

To me, it sounds like a mixer setting that needs to be
adjusted...but, it's really hard to tell.

Not every card can record it's own output/MIDI signal.

Unfortunately there's not much we can suggest here, you would have to
refer to your soundcard manual for this one.

Thanks.

nate wrote:
>>when i trigger the sound regions I want in Soundforge to
>>play on my external controller, I want to use ACID to
>>record into while montoring my other tracks.....I can get
>>the tracks to playback just fine when recording, the only
>>problem I am running into is that the signal from the sound
>>events are being recorded very low, almost non-existent!!!
>>I hear the sound events being recorded, so my playback and
>>recording options are all ok, and i have my MIDI volume
>>fader on my SB PC1512(soundcard) all the way up, as well as
>>the other soundcard inputs/outputs......why is the level of
>>recording so low, it's a mono sample, but that shouldn't do
>>anything w/ the amplitude of the signal, how can I route
>>the audio signal being played in SF (a virtual sample being
>>triggered) to be recorded by ACID as regions are triggered
>>and have no signal loss.....is it a software configuration
>>or wahat, i don't think it's my audio on my sound card b/c
>>i'm only using MIDI I/O......and Line Out for playback in
>>my monitor speakers of course......please let me know if I
>>need to configure ACID to record directly from audio region
>>being triggered in SF 4.5....thanks a lot nate