ACID TO WAVE TO CD QUALITY PROBLEMS......PLZ HELP -ACID Product Family

Subject:ACID TO WAVE TO CD QUALITY PROBLEMS......PLZ HELP Posted by: Hexum311 Date:12/2/1999 12:28:00 AM Hello out there.....I have a problem, and I may sound like a dumbass....but here goes. I want to take a recorded file from ACID, export it as a wave file, and burn it to CD, but the file wont burn because it says that it is not CD quality.... SOMEONE PLEASE HELP WITH ANY TIPS POSSIBLE Thank you very much. If possible, please email me @ mbsetme@aol.com with any help Thanks again Mark Bradley
Subject:Re: ACID TO WAVE TO CD QUALITY PROBLEMS......PLZ HELP Reply by: SonicGary Date:12/2/1999 8:06:00 AM Mark, If you're trying to burn a CD to Red Book standards (music CDs) then your file must be at 44,100 kHz sampling rate, and 16-bit. Check your settings in ACID to make sure you are saving your .wav file with these settings. To do so choose "Options \| Preferences" and click on the "Audio" tab. Set the "Playbak and record sample rate:" box to "44,100" and your "Playback sample size:" to "16-bit". I think this should solve your problem. To make life easier, you could upgrade to ACID 2.0 (Music or Pro). Both of these feature CD burning with a click of a button right inside ACID. Good luck, Gary Mark Bradley wrote: >>Hello out there.....I have a problem, and I may sound like >>a dumbass....but here goes. >> >>I want to take a recorded file from ACID, export it as a >>wave file, and burn it to CD, but the file wont burn >>because it says that it is not CD quality.... >> >>SOMEONE PLEASE HELP WITH ANY TIPS POSSIBLE >> >>Thank you very much. >> >>If possible, please email me @ mbsetme@aol.com with any help >> >>Thanks again >> >>Mark Bradley

Mark,

If you're trying to burn a CD to Red Book standards (music CDs) then
your file must be at 44,100 kHz sampling rate, and 16-bit. Check your
settings in ACID to make sure you are saving your .wav file with
these settings. To do so choose "Options | Preferences" and click on
the "Audio" tab. Set the "Playbak and record sample rate:" box
to "44,100" and your "Playback sample size:" to "16-bit". I think
this should solve your problem.

To make life easier, you could upgrade to ACID 2.0 (Music or Pro).
Both of these feature CD burning with a click of a button right
inside ACID.

Good luck,

Gary

Mark Bradley wrote:
>>Hello out there.....I have a problem, and I may sound like
>>a dumbass....but here goes.
>>
>>I want to take a recorded file from ACID, export it as a
>>wave file, and burn it to CD, but the file wont burn
>>because it says that it is not CD quality....
>>
>>SOMEONE PLEASE HELP WITH ANY TIPS POSSIBLE
>>
>>Thank you very much.
>>
>>If possible, please email me @ mbsetme@aol.com with any help
>>
>>Thanks again
>>
>>Mark Bradley