|
Subject:ACID Pro 6.0b: Insert Bus doesn't work proper
Posted by: bjorn
Date:8/12/2006 3:19:54 PM
When clicking on the "Insert Bus" button in the mixer, nothing happens. No new busses appear. (But the number of busses has increased in the "Project Properties".) |
|
Subject:RE: ACID Pro 6.0b: Insert Bus doesn't work proper
Reply by: pwppch
Date:8/12/2006 3:45:16 PM
I cannot reproduce this with 6.0b - or any version. Are you running the english version or one of the international versions? If you go to the Inert main menu and select insert bus, does it work there? If you close and then reopen the mixer view does the bus appear? Peter PS: Please fill out your system specs Message last edited on8/12/2006 3:47:28 PM bypwppch. |
|
Subject:RE: ACID Pro 6.0b: Insert Bus doesn't work proper
Reply by: MacMoney
Date:8/12/2006 3:48:16 PM
Hi bjorn, I'm not able to repo. this in Acid 6.0b I get a Bus A when I click on Inerst Bus George Ware Message last edited on8/12/2006 3:48:57 PM byMacMoney. |
|
Subject:RE: ACID Pro 6.0b: Insert Bus doesn't work proper
Reply by: bjorn
Date:8/13/2006 8:12:07 AM
Today it works, so this was a glitch. |