ACID crashes on 'MSVCR71.dll' -ACID Product Family

Subject:ACID crashes on 'MSVCR71.dll' Posted by: dont Date:7/26/2006 9:54:51 PM Greetings I purchased ACID 6.0 a few weeks ago and installed it. every since I have had issues with ACID crashing. I used a trial version for a long time and had no problems with it, but as soon as I got the box in the mail it started giving me fits with 'MSVCR71.dll' This is happening every time I use the program. I have downloaded the (Version 6.0a (Build 263)) update and done a clean install with it, but the issue persists. I am not using media manager it seems to happen when I use save, copy or when autosave runs (I have disabled autosave now to cut down on the crashes). I get the below error, then following after is a alert box wthat says " D:projects\rewire\rewireDLL\portable\ReWireDLL.cpp(990) : VERIFY falure" thanks don t ____ERROR_BELOW___ Sony ACID Pro 6.0 Version 6.0a (Build 263) Exception 0xC0000005 (access violation) READ:0x0 IP:0x7C350428 In Module 'MSVCR71.dll' at Address 0x7C340000 + 0x10428 Thread: ProgMan ID=0x608 Stack=0x1C3F000-0x1C40000 Registers: EAX=0000003a CS=001b EIP=7c350428 EFLGS=00010202 EBX=7c35043c SS=0023 ESP=01c3f380 EBP=036f6630 ECX=01c3f7cc DS=0023 ESI=0bdc3570 FS=0038 EDX=00000000 ES=0023 EDI=7c350420 GS=0000 Bytes at CS:EIP: 7C350428: 66 8B 02 66 89 01 41 41 f..f..AA 7C350430: 42 42 66 85 C0 75 F1 8B BBf..u.. Stack Dump: 01C3F380: 0057EAD2 00400000 + 17EAD2 (acid60.exe) 01C3F384: 01C3F7CC 01B40000 + FF7CC 01C3F388: 00000000........ Message last edited on7/26/2006 10:06:34 PM bydont.
Subject:RE: ACID crashes on 'MSVCR71.dll' Reply by: pwppch Date:7/27/2006 10:51:39 AM The error dump is incomplete. Could you update to include the entier error msg? Can you describe what you are doing in detail when this error occurs? What does your project look like? Are you using Softsynths? External Control? Specific VST or DX FX plugings? Note: The ReWire.DLL.cpp warning is misleading. This message is produced by the ReWire system dll provided by Propellerheads and indicates that something has failed in the host app (ACID) that uses the ReWire system. It does not indicate a problem related to ReWire. Peter
Subject:RE: ACID crashes on 'MSVCR71.dll' Reply by: dont Date:7/27/2006 5:26:09 PM This time it happened the first time I hit the save button. It happens in fourdifferent ways, on autosave, when the save button is clicked or when I hit ctrl: + S or ctrl: + C Project: 35 tracks, very small loops all less that 0.5 MB Audio: 44,100 Hz, 16 Bit, Stereo/Mono Temp storage: default install. My Documents\Sony ACID Pro 6.0 Projects I am not using any VST instruments or MIDI FX plug ins are: Cakewalk sonitus gate Sony track EQ My system specs are in my profile I do not have any errors with other software/plugin/VST combinations and no hardware issues during operation of other software. That is about it. Thanks DT the error is as follows Version 6.0a (Build 263) Exception 0xC0000005 (access violation) READ:0x0 IP:0x7C350428 In Module 'MSVCR71.dll' at Address 0x7C340000 + 0x10428 Thread: ProgMan ID=0x4D4 Stack=0x1C3F000-0x1C40000 Registers: EAX=0000003a CS=001b EIP=7c350428 EFLGS=00010202 EBX=7c35043c SS=0023 ESP=01c3f380 EBP=0372b510 ECX=01c3f7cc DS=0023 ESI=07df8400 FS=0038 EDX=00000000 ES=0023 EDI=7c350420 GS=0000 Bytes at CS:EIP: 7C350428: 66 8B 02 66 89 01 41 41 f..f..AA 7C350430: 42 42 66 85 C0 75 F1 8B BBf..u.. Stack Dump: 01C3F380: 0057EAD2 00400000 + 17EAD2 (acid60.exe) 01C3F384: 01C3F7CC 01B40000 + FF7CC 01C3F388: 00000000 01C3F38C: 00000000 01C3F390: 0372B510 035F0000 + 13B510 01C3F394: 07DF8400 07C60000 + 198400 01C3F398: 00000024 01C3F39C: 00000001 01C3F3A0: 00000002 01C3F3A4: 00000002 01C3F3A8: 00000001 01C3F3AC: 0000003A 01C3F3B0: 0000003A 01C3F3B4: 00000000 01C3F3B8: 00000000 01C3F3BC: 00200031 00130000 + D0031 > 01C3F3C0: 006C0043 00400000 + 2C0043 (acid60.exe) > 01C3F3C4: 00700069 00400000 + 300069 (acid60.exe) 01C3F3C8: 00310020 00300000 + 10020 01C3F3CC: 002D0020 002A0000 + 30020 > 01C3F3D0: 00430020 00400000 + 30020 (acid60.exe) > 01C3F3D4: 006F0068 00400000 + 2F0068 (acid60.exe) > 01C3F3D8: 00700070 00400000 + 300070 (acid60.exe) - - - 01C3FFF0: 00000000 01C3FFF4: 0041CDC0 00400000 + 1CDC0 (acid60.exe) 01C3FFF8: 0082AFC0 00400000 + 42AFC0 (acid60.exe) 01C3FFFC: 00000000 Message last edited on7/27/2006 5:26:51 PM bydont.
Subject:RE: ACID crashes on 'MSVCR71.dll' Reply by: dont Date:7/27/2006 7:56:16 PM I think it is related to a null value in a clip name. it seems that when I right click on a clip and rename it to " " (empty text string ) it will crash every time. If I rename it to anything or just one character it will not crash run that past the programmers. DT

Subject:ACID crashes on 'MSVCR71.dll'

Posted by: dont

Date:7/26/2006 9:54:51 PM

Greetings

I purchased ACID 6.0 a few weeks ago and installed it. every since I have had issues with ACID crashing. I used a trial version for a long time and had no problems with it, but as soon as I got the box in the mail it started giving me fits with 'MSVCR71.dll'

This is happening every time I use the program.

I have downloaded the (Version 6.0a (Build 263)) update and done a clean install with it, but the issue persists.

I am not using media manager

it seems to happen when I use save, copy or when autosave runs (I have disabled autosave now to cut down on the crashes).

I get the below error, then following after is a alert box wthat says " D:projects\rewire\rewireDLL\portable\ReWireDLL.cpp(990) : VERIFY falure"

thanks
don t

____ERROR_BELOW___

Sony ACID Pro 6.0
Version 6.0a (Build 263)
Exception 0xC0000005 (access violation) READ:0x0 IP:0x7C350428
In Module 'MSVCR71.dll' at Address 0x7C340000 + 0x10428
Thread: ProgMan ID=0x608 Stack=0x1C3F000-0x1C40000
Registers:
EAX=0000003a CS=001b EIP=7c350428 EFLGS=00010202
EBX=7c35043c SS=0023 ESP=01c3f380 EBP=036f6630
ECX=01c3f7cc DS=0023 ESI=0bdc3570 FS=0038
EDX=00000000 ES=0023 EDI=7c350420 GS=0000
Bytes at CS:EIP:
7C350428: 66 8B 02 66 89 01 41 41 f..f..AA
7C350430: 42 42 66 85 C0 75 F1 8B BBf..u..
Stack Dump:
01C3F380: 0057EAD2 00400000 + 17EAD2 (acid60.exe)
01C3F384: 01C3F7CC 01B40000 + FF7CC
01C3F388: 00000000........

Message last edited on7/26/2006 10:06:34 PM bydont.

Subject:RE: ACID crashes on 'MSVCR71.dll'

Reply by: pwppch

Date:7/27/2006 10:51:39 AM

The error dump is incomplete. Could you update to include the entier error msg?

Can you describe what you are doing in detail when this error occurs?

What does your project look like? Are you using Softsynths? External Control? Specific VST or DX FX plugings?

Note:
The ReWire.DLL.cpp warning is misleading. This message is produced by the ReWire system dll provided by Propellerheads and indicates that something has failed in the host app (ACID) that uses the ReWire system. It does not indicate a problem related to ReWire.

Peter

Subject:RE: ACID crashes on 'MSVCR71.dll'

Reply by: dont

Date:7/27/2006 5:26:09 PM

This time it happened the first time I hit the save button. It happens in fourdifferent ways, on autosave, when the save button is clicked or when I hit ctrl: + S or ctrl: + C

Project: 35 tracks, very small loops all less that 0.5 MB

Audio: 44,100 Hz, 16 Bit, Stereo/Mono

Temp storage: default install. My Documents\Sony ACID Pro 6.0 Projects

I am not using any VST instruments or MIDI

FX plug ins are:
Cakewalk sonitus gate
Sony track EQ

My system specs are in my profile

I do not have any errors with other software/plugin/VST combinations and no hardware issues during operation of other software.

That is about it.
Thanks
DT

the error is as follows

Version 6.0a (Build 263)
Exception 0xC0000005 (access violation) READ:0x0 IP:0x7C350428
In Module 'MSVCR71.dll' at Address 0x7C340000 + 0x10428
Thread: ProgMan ID=0x4D4 Stack=0x1C3F000-0x1C40000
Registers:
EAX=0000003a CS=001b EIP=7c350428 EFLGS=00010202
EBX=7c35043c SS=0023 ESP=01c3f380 EBP=0372b510
ECX=01c3f7cc DS=0023 ESI=07df8400 FS=0038
EDX=00000000 ES=0023 EDI=7c350420 GS=0000
Bytes at CS:EIP:
7C350428: 66 8B 02 66 89 01 41 41 f..f..AA
7C350430: 42 42 66 85 C0 75 F1 8B BBf..u..
Stack Dump:
01C3F380: 0057EAD2 00400000 + 17EAD2 (acid60.exe)
01C3F384: 01C3F7CC 01B40000 + FF7CC
01C3F388: 00000000
01C3F38C: 00000000
01C3F390: 0372B510 035F0000 + 13B510
01C3F394: 07DF8400 07C60000 + 198400
01C3F398: 00000024
01C3F39C: 00000001
01C3F3A0: 00000002
01C3F3A4: 00000002
01C3F3A8: 00000001
01C3F3AC: 0000003A
01C3F3B0: 0000003A
01C3F3B4: 00000000
01C3F3B8: 00000000
01C3F3BC: 00200031 00130000 + D0031
> 01C3F3C0: 006C0043 00400000 + 2C0043 (acid60.exe)
> 01C3F3C4: 00700069 00400000 + 300069 (acid60.exe)
01C3F3C8: 00310020 00300000 + 10020
01C3F3CC: 002D0020 002A0000 + 30020
> 01C3F3D0: 00430020 00400000 + 30020 (acid60.exe)
> 01C3F3D4: 006F0068 00400000 + 2F0068 (acid60.exe)
> 01C3F3D8: 00700070 00400000 + 300070 (acid60.exe)
- - -
01C3FFF0: 00000000
01C3FFF4: 0041CDC0 00400000 + 1CDC0 (acid60.exe)
01C3FFF8: 0082AFC0 00400000 + 42AFC0 (acid60.exe)
01C3FFFC: 00000000

Message last edited on7/27/2006 5:26:51 PM bydont.

Subject:RE: ACID crashes on 'MSVCR71.dll'

Reply by: dont

Date:7/27/2006 7:56:16 PM

I think it is related to a null value in a clip name.

it seems that when I right click on a clip and rename it to " " (empty text string ) it will crash every time.

If I rename it to anything or just one character it will not crash

run that past the programmers.
DT