Community Forums Archive

Go Back

Subject:compression
Posted by: samcat
Date:7/10/2006 5:23:34 PM

I have noticed when I use compression (soft) as in wave hammer it raises the noise floor so quiet parts of the music sounds like the noise you hear on a phonography record at the beginning of the record, "white noise". Any ideas?

Subject:RE: compression
Reply by: jumbuk
Date:7/10/2006 6:01:06 PM

That is exactly what you would expect to happen. The solution is to use a gate or (better) a downwards expander to reduce the noise. The Sony graphic dynamics plug-in can be used to do this. Do a search on this forum - there was a simlar discussion a while back.

Subject:RE: compression
Reply by: garrigus
Date:7/10/2006 6:09:50 PM

Hi Samcat,

Check out this article...

Using Compression and Compressors for Audio Recording
http://www.digifreq.com/digifreq/article.asp?ID=20

And find more articles here:
http://www.digifreq.com/digifreq/articles.asp

Scott

--
Scott R. Garrigus - Author of Cakewalk, Sound Forge and Sound Forge 6, SONAR, SONAR 2, SONAR 3, SONAR 4, and Sound Forge 8 Power! books.
** Sonar 5 Power The Comprehensive Guide - Now Available! ** Books up to 37% off at:
http://www.garrigus.com/

Publisher of DigiFreq. Win free iZotope music software and learn cool music technology tips and techniques by getting a FREE subscription to DigiFreq... over 19,000 readers can't be wrong! Go to:
http://www.digifreq.com/digifreq/

Message last edited on7/10/2006 6:10:26 PM bygarrigus.
Subject:RE: compression
Reply by: Geoff Edwards
Date:7/21/2006 7:37:46 AM

If you are getting a lot of noise when compressing your audio check to make sure that you are a) recording your signal at a decent level to begin with. If your original recording is too soft it may be buried in the noise and when you compress you will get unpleasant results. b) Some sound cards are inherently noisey as well so when you compress they accentuate this.

Good luck.

G.

Message last edited on7/21/2006 7:38:30 AM byGeoff Edwards.

Go Back