Subject:Can't Reason With Acid!

Posted by: Kyoto

Date:10/26/2005 1:55:06 PM

I can't seem to create a bus for Reason. I open the soft synth chooser, click the rewire devices tab, highlight reason mix, click OK. I am expecting then to see a bus for reason - but it does show up! Am I doing something wrong?

I open my Reason project first and then open Acid.

Thanks

Subject:RE: Can't Reason With Acid!

Reply by: MyST

Date:10/26/2005 4:00:34 PM

Propellerhead's website explains how to use Reason with Acid (in the support section), did you check that out to see if it helped?

Mario

Subject:RE: Can't Reason With Acid!

Reply by: JohnnyRoy

Date:10/26/2005 4:50:46 PM

> I open my Reason project first and then open Acid.

BINGO! There is your problem. If you are inserting Reason into ACID, then you must open ACID first. When you insert Reason, it will get loaded. Then load your project into Reason and go back to ACID.

This is failing because, unlike ACID, Reason only allows one instance of itself to be in memory and once and since it’s already loaded as a stand-alone application, it can’t be loaded as a ReWire device.

~jr

Subject:RE: Can't Reason With Acid!

Reply by: Kyoto

Date:10/27/2005 3:41:13 PM

That's it! Got it workin' great now. Thanks so much for your help!