|
Subject:SOUND FORGE DOES NOT "SEE" MY BURNERS
Posted by: High Mayhem Studios
Date:3/5/2005 12:14:24 PM
I don't get it. When going to select a burner, there are non in the drop down menu and at the bottom it says" no devices. Nero sees my burners fine! Does anyone have any thoughts? I have the same issue with CD Architect and Vegas and also Steinberg Wavelab too! Any help would be much appreciated! |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: MyST
Date:3/5/2005 1:25:26 PM
System specs? Processor/Motherboard, etc. Mario |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: High Mayhem Studios
Date:3/5/2005 2:34:53 PM
System Specs Windows Version: XP RAM: Above 1gb Processor: AMD Athlon 64-bit 3400+ at 2.4GHz Video Card: Radeon ATI 9600, 256 DDR Sound Card: MOTU PCI-424 Video Capture: Texas Instuments Integrated on MOBO CD Burner: CDRW -SONY CRX320E, DVD Burner: DVD-RW SONY DW-D22A Camera: if you click on my user name you can see more... what do you think about the problem i'm having? |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: jorgensen
Date:3/6/2005 12:31:17 PM
Copied from CDA forum. I have the same problem, which happend when I added a SATA RAID to the system. The motherboard has a nForce3 chipset, and it looks like Sonic/Sony uses a special way to see the CD-ROMs, that is different from what others are doing. Still wating for a solution from nVidia. |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: Geoff_Wood
Date:3/6/2005 11:26:21 PM
Tryspecifying the generic MMC-compatible ATAPI or SCSI drivers. geoff |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: Ted_H
Date:3/7/2005 9:21:25 AM
jorgensen - Have you been in touch with nVidia about this issue? Did they acknowledge the issue and confirm that they are working on a solution? Thanks! Ted |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: jorgensen
Date:3/7/2005 10:47:03 PM
nVidia only support customers, so I reported it to MSI, who asked for detailed information. That is one month ago, and I haven’t heard from them since. The motherboard is MSI KN8 Neo2 Platinum with nForce3 Ultra chipset, and the harddisk setup is as follow. ASPI 00 01 00 Disk Drive NVIDIA STRIPE 298.10G 00 07 00 Host Adapter nvraid 01 00 00 Optical Drive LITE-ON DVD SOHD-167T 01 01 00 Optical Drive _NEC DVD _RW ND-1300A 01 02 00 Disk Drive IC35L120 AVV207-1 01 07 00 Host Adapter nvatabus 02 00 00 Disk Drive ST316002 3AS 02 02 00 Disk Drive ST316082 7AS 02 07 00 Host Adapter nvatabus Drivers have version 5.10.2600.446 NVIDIA nForce3 250 Parallel ATA Controller (v2.6) NVIDIA nForce3 250 Serial ATA Controller (v2.6) NVIDIA NForce(tm) ATA RAID Class Controller As mentioned the access to the CD-ROMs were lost, when the SATA RAID was added. Prior with one ATA and one SATA, there was no problem, and it looks like it is only Sonic/Sony that has the problem. |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: High Mayhem Studios
Date:3/9/2005 10:11:22 AM
Actually i have the same issue with Steinberg's WaveLab 4.0...yet nero, itunes, cd-clone and windows' own writing tools work fine. my SATA is mobo integrated and I diabled it in bios to no avail...this sucks! |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: jorgensen
Date:3/17/2005 4:05:53 AM
Had some time to mingle with it on a clean installation. If RAID is required, there is no way to have access to the CD-ROMs untill nVidia gets it fixed. But if not, access can be regained by the following procedure. In ‘Add or Remove Programs’ in Control Panel, remove IDE drivers in the NVIDIA Drivers tag. After rebooting rename or delete nvraid.sys in the system32\drivers folder. Reboot |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: jorgensen
Date:4/12/2005 6:49:07 AM
Tried on a new computer using Gigabyte mb with nForce4 and one SATA RAID. CD-ROM is still not available on this setup. |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: cmallam
Date:5/4/2005 4:09:27 PM
A8N-SLI NVidia 4 chipset. Neither Acid 5, nor DVD Architect 3 see my Pioneer A07, but Nero 6 sees it and burns DVD Architect projects just fine. i do have a sata raid, and i also have a promise Ultra 100 controller that hosts a software raid set. i seem to recall that i even hooked up the Pioneer to the Promise, but DVD Architect still didn´t see the drive. i may repeat this experiment with the latest NVidia drivers. |
|
Subject:RE: SOUND FORGE DOES NOT "SEE" MY BURNERS
Reply by: rlindzen
Date:7/10/2005 4:18:14 PM
Have you found a solution yet? I have the same problem with SF6. Dick |