Subject:Rewiring Acid 5.0 to Cubase SX3.0: Your experiences?

Posted by: Baxter1

Date:12/1/2004 11:54:22 PM

Has anyone rewired Acid 5.0 to Cubase SX 3.0? Any luck with it? Is it stable? and above all, can you use the Acid transport controls to make the whole thing go? I have Cubase SX 1.06 and it is hopeless (it also isn't supported as an Acid Rewire master because it was never tested as such by Sony). I want to be able to use the Acid loop browser in real time.

Subject:RE: Rewiring Acid 5.0 to Cubase SX3.0: Your experiences?

Reply by: Iacobus

Date:12/2/2004 10:09:47 AM

I believe some have had great success with the combo. (Was it MacMoney? I can't remember.) Might want to try a demo of Cubase to see if you have the same results.

Iacobus
-------
RodelWorks - Original Music for the Unafraid
Pre-order Instant ACID
mD at ACIDplanet
Guitars 4 Kids

Subject:RE: Rewiring Acid 5.0 to Cubase SX3.0: Your experiences?

Reply by: jardeano

Date:12/2/2004 12:21:29 PM

everything working good on this end running a modest gateway laptop XP service pack 1 with a tascam us-428 sound device/controller, You can trigger the transport controls from Acid or Sx3,,, Like everything else some claim to have problems ,,some don't ,,,,,, I do know that with the Sx3 update it fixed some rewire issues,,,,,,,

Subject:RE: Rewiring Acid 5.0 to Cubase SX3.0: Your experiences?

Reply by: jardeano

Date:12/2/2004 12:36:43 PM

and yes,,,you can real time preview your loops in Acid ,,one of my favorite update features, the new "loop preview" in Acid.

Subject:RE: Rewiring Acid 5.0 to Cubase SX3.0: Your experiences?

Reply by: Baxter1

Date:12/2/2004 1:12:23 PM

I thank all of you very much for your replies. That is the information I was looking for. Only bummer is, I now have to spend $300 USD in Acid and SX upgrade fees to make it all work. Oh, well, as the say, It's Only Money! Thanks again.

Baxter