Subject:Volume

Posted by: Sloopy

Date:7/14/2003 7:46:54 AM

If you are working with many tracks in acid at one time, is there anyway in which you can put all of the tracks at the same volume level? If so, how to do it?

Subject:RE: Volume

Reply by: Iacobus

Date:7/14/2003 12:39:14 PM

I don't any way offhand, but if they're at the same initial volume level already, you can hold down CTRL and click on each track to include, then either drag the volume slider or double-click the slider to set at 0.0 dB.

The same also applies to tracks of differing volume levels but only relatively. If one track is set at -6.0 dB and another is set at -4.0 dB and they're both selected, setting the track that's at -6.0 up 2.0 dB will also set the track at -4.0 dB up 2.0 dB. (The new volumes will be -4.0 dB and -2.0 dB, respectively.)

HTH,
Iacobus

Subject:RE: Volume

Reply by: dkistner

Date:7/14/2003 1:17:05 PM

I've been wondering if there wasn't a quick trick for this! Thanks, Iacobus!

Subject:RE: Volume

Reply by: Iacobus

Date:7/14/2003 2:56:18 PM

You're welcome, D.! (Wasn't sure if my post would help, but I try anyway.) :)

Iacobus

Subject:RE: Volume

Reply by: Sloopy

Date:7/15/2003 10:07:19 AM

Thx!!