Subject:isolating channels

Posted by: lost

Date:5/31/2003 8:39:05 PM

is there a way using sf 5.0, after doing all my edits before i send as .wav to hard disc to isolate either left or right channel? in other words i want to either put all of left channel or all of right channel on both channels before i save to hard disc. thanx, in advance, so much.

Subject:RE: isolating channels

Reply by: Geoff_Wood

Date:5/31/2003 9:00:31 PM

Select either the left (top half) or right (bottom half) and CTRL/Drag it to a vacant spot on the SForge window, and there is your new mono file.

geoff

Subject:RE: isolating channels

Reply by: lost

Date:6/1/2003 3:54:33 PM

Forgive me for my ignorance, but do i select top half (left channel) or bottom half (right channel) by placing cursor in top or bottom of screen and then left double clicking? I think this is correct, but how do I "ctrl/drag" it to vacant spot on sf window? How do you "drag" and what window is sf window and where is vacant spot? I appreciate your help so much.

Subject:RE: isolating channels

Reply by: MyST

Date:6/1/2003 4:19:16 PM

http://www.sonicfoundry.com/tutorials/default.asp

Above is the link to the tutorials section. I would suggest you begin with the basic navigation of SoFo software, then move on to the Sound Forge tutorials. They should help you out.

M

Subject:RE: isolating channels

Reply by: lost

Date:6/2/2003 9:12:20 PM

Okay. I think I get idea, but there is still problem. When I isolate channels by dragging one of the channels to clear area of larger sound forge window, then play it back, the sound becomes very soft. What happened? Please help.