Subject:Acid 4 - Gina24 Problem
Posted by: Steff
Date:4/10/2003 8:06:45 AM
Can`t seem to use the ASIO Echo WDM Driver ...... will let me previem samples no problem but on playback I get a "An Error occured while starting playback - a device is not ready" ...... error ......is it something simple I`ve overlooked (nothing else is running)....Thanks 4 solution.... |
Subject:RE: Acid 4 - Gina24 Problem
Reply by: Steff
Date:4/10/2003 8:13:16 AM
Change that ....when I open Acid and preview a sample it works ...... if I then play a tune I get the error I mentioned .....if I then try to preview a sample after the error,it will play but there is no sound ........ |
Subject:RE: Acid 4 - Gina24 Problem
Reply by: Iacobus
Date:4/10/2003 1:12:07 PM
Sounds like a driver problem. Did you ensure that the driver was installed properly? Might want to also completely uninstall ACID and try reinstalling using the latest version of ACID 4.0 (the update actually can act as a standalone full version; keep your serial key handy). HTH, Iacobus |
Subject:RE: Acid 4 - Gina24 Problem
Reply by: Steff
Date:4/10/2003 5:34:20 PM
Uninstalled and re-installed Acid & drivers to no avail ........ all over programs work fine with these drivers (the latest from Echo 6.07)... thanks anyway |
Subject:RE: Acid 4 - Gina24 Problem
Reply by: pwppch
Date:4/10/2003 9:22:45 PM
Do you have any MIDI devices enabled on the MIDI prefs page? Is the Windows mapper set to use the Gina? (In Control Panel "Sounds and Audio Devices") Can you use the ASIO drivers for the Gina? Do you have the Gina set up to use Pure Wave? Peter |
Subject:RE: Acid 4 - Gina24 Problem
Reply by: spesimen
Date:4/14/2003 3:08:06 PM
also, you might want to double check that you don't have the gina control panel set to lock the sampling rate or use one of the digital outs instead. i use the same card with acid and it works very well with the MME settings. the ASIO drivers don't work reliably though so i'd advise to avoid them until the next round of patches. (they are functional, but jitter and skip.) |