Community Forums Archive

Go Back

Subject:acid 4.0 demo hangs on startup
Posted by: Om_Audio
Date:9/8/2002 12:06:35 AM

hi...
totally new to acid, and wanted to try it out. i've installed it and am trying to run it in demo mode. it hangs at the startup screen. i can't even escape with a ctr/alt/del. this happens every time...I tried running 3.0g in demo mode with same results- any help here?

carillon ac-1 pIV 2.0ghz
512mb ddram
seagate 7200rpm system
seagate 7200rpm audio drive
ati radeon 7000
totally clean win2000-brand new install-sp3
m-audio delta 66 - omni studio i/o
midiman midisport 2x2
iomega usb zip100

i've read the posts regarding the m-audio delta cards, but it seems like everyone has problems once the prog is up and running. i can't even get the thing to start.

thanks in advance,

rich

Subject:RE: acid 4.0 demo hangs on startup
Reply by: SonyIMC
Date:9/8/2002 9:26:38 AM

Did you install the latest drivers from ATI?

There is an issue with them that causes our apps to lock up on start up.

ATI has been made aware of this issue. In the mean time the solution is to lower the accelaration of the card or revert to the previous version of the drivers.

To do this: go to the Display properties and select advanced. In the advanced dialog chage to the troubleshooting tab and lower the hardware acceleration to disable all DirectDraw and Direct3D accelerations.

Hope this helps.

Subject:RE: acid 4.0 demo hangs on startup
Reply by: Om_Audio
Date:9/8/2002 7:02:20 PM

YES! I installed the latest ATI drivers and your suggestion solved my problem!! Thank you very much for the extremly prompt and helpful reply. You guys rock.

Go Back