I did a video recording of our church choir and want to marry up the .mp3 track that was recorded via our sound system instead of using what the camera recorded. It takes some nudging of the the audio track, but I get the two synced up to start with. At that point I am looking at a close-up of one of the soloists.
A few seconds later a second soloist joins and as they sing I can tell that the audio and video are disjointed again. If I align them here, that's just going to screw up where I started the alignment.
Is this something based upon how the two recordings were made? Is there a way I can get them to sync?
Here's some tech details:
VIDEO
General
Type: MPEG-2 Transport Stream
Streams
Video: 00:05:55:.856, 29.970 fps interlaced, 1920x1080x12, AVC
Audio 1: 00:05:55.856, 48,000 Hz, 5.1 Surround (stereo downmix), Dolby AC-3
Audio 2: 00:05:55:856, 48,000 Hz, 5.1 Surround, Dolby AC-3
Plug-In
Name: compoundplug.dll
Format: MPEF-2 Transport Stream
Version: Version 12.0 (Build 394) 64-bit
AUDIO
General
Type: MP3 Audio
Size: 11.00 MB
Streams
Audio: 00:05:51.847, 256 Kbps, 44,100 Hz, Stereo, MPEG Layer-3
Plug-In
Name: mp3plug2.dll
Format: MP3 Audio
Version: Version 12.0 (Build 394)
Could it be something related to the original audio being recorded on the video at 48,000 Hz vs. the audio being 44,100 Hz?
A few seconds later a second soloist joins and as they sing I can tell that the audio and video are disjointed again. If I align them here, that's just going to screw up where I started the alignment.
Is this something based upon how the two recordings were made? Is there a way I can get them to sync?
Here's some tech details:
VIDEO
General
Type: MPEG-2 Transport Stream
Streams
Video: 00:05:55:.856, 29.970 fps interlaced, 1920x1080x12, AVC
Audio 1: 00:05:55.856, 48,000 Hz, 5.1 Surround (stereo downmix), Dolby AC-3
Audio 2: 00:05:55:856, 48,000 Hz, 5.1 Surround, Dolby AC-3
Plug-In
Name: compoundplug.dll
Format: MPEF-2 Transport Stream
Version: Version 12.0 (Build 394) 64-bit
AUDIO
General
Type: MP3 Audio
Size: 11.00 MB
Streams
Audio: 00:05:51.847, 256 Kbps, 44,100 Hz, Stereo, MPEG Layer-3
Plug-In
Name: mp3plug2.dll
Format: MP3 Audio
Version: Version 12.0 (Build 394)
Could it be something related to the original audio being recorded on the video at 48,000 Hz vs. the audio being 44,100 Hz?