Vegas 6c - PTT still not working

Aje wrote on 10/4/2005, 8:35 AM

Installed VV6c today but my camcorder is still not detected in the print to tape window !
I really thought that Sony had done something to this basic failure this time !
Before I used VV4 to PTT but after a virusscan with a newly installed
virus and firewall program "Zone Alarm Security Suite" vV4 refuses to start so now I´m really frustrated.
I have tried to reinstall VV4 but no change.
Why can´t VV6 detect my cam and PTT as VV4 did?
I´m using PAL.
With hope of help /Aje

Comments

Rogueone wrote on 10/4/2005, 9:01 AM

Can you load up Vegas 4.0 if you shut down ZoneAlarm? You may have to add that program to ZA's allowed list.

Spot|DSE wrote on 10/4/2005, 9:21 AM

you have Vegas 6c loaded? There were some implemenations to fix connectivity with older camcorders.

Aje wrote on 10/4/2005, 9:44 AM

thanks for answer
No I can´t start vegas 4 after having shut down Zone Alarm.
I have a 1/2 year old Panasonic GS400 and it don´t show up in VV6C PTT.
/Aje

Aje wrote on 10/4/2005, 12:07 PM

OK
Now i can print to tape with crash recording in VV6c but why - can Sony tell me why is the Autoedit possibility greyed out though I can see the tape location figures for start and end of print in it???
There must be some sort of communication between my camcorder
and VV6c´s PTT window
I would like an answer from Sony!
/Aje

farss wrote on 10/5/2005, 7:52 AM

I suspect this isn't a Vegas thing. V6.0c will capture from my DSR-11 on my Win2K system but it's a real crap shoot on the WinXP system.
Are you running XP and if so does Windoz make a sound when you plug in the camera?
Bob.

richard-courtney wrote on 10/5/2005, 9:15 AM

I just tried it with a PD170 and it hangs within 2 seconds of starting.
Is yours buffering any amount of data?

Disconnecting the firewire cable clears the hang and it gives the
double ding sound. If I have time I will look into it deeper.